The fin type heater is made of high-quality stainless steel, modified protactinium oxide powder, high-resistance electric heating alloy wire, stainless steel heat sink and other materials, manufactured through advanced production equipment and technology, and has undergone strict quality management. This series of products can be installed In blowing ducts or other heating occasions with static and flowing air. It is a metal radiating fin wound on the surface of an ordinary element, and the heat dissipation area is expanded by 2 to 3 times compared with that of an ordinary element, that is, the allowable surface power load of the fin element is 3 to 4 times that of an ordinary element. Because the length of the element is shortened, the heat loss is reduced. Products are widely used in machinery manufacturing, automobiles, textiles, food, home appliances and other industries, especially in the air-conditioner air curtain industry.
Process: It is made of fins wound around the outer surface of the heating tube to dissipate heat.
Uses: Used for heating in ovens and drying tunnels. The general heating medium is air.
Features: Good heat dissipation effect and high thermal efficiency.
It is a metal heat sink wound on the surface of an ordinary light pipe (ordinary electric heating element). Compared with a light pipe, it has the following advantages:
★ Compared with ordinary light pipes, the heat dissipation area of the finned tubular electric heating element is increased by 2 to 3.5 times, and the tube surface load is increased by ～2 times than that of the light pipe.
★ Compared with the light pipe, the finned electric heating element has a shorter length, which reduces its own heat loss. Under the same power condition as the light tube, it has the advantages of fast heating, high thermal efficiency and long service life.
★ In a limited heating device, the power can reach ~ 2 times the power of the light tube, which greatly reduces the volume of the heating device and saves the user's cost.
★ Fin type heaters are widely used in heating places with static flowing air. Used in hot air, ventilation, drying room, heating, etc. in machinery manufacturing, automobiles, textiles, food, spraying, air conditioning and other industries.