Melt-blown cloth is a high-speed hot air flow to draw a thin stream of polymer melt extruded from the die orifice, thereby forming ultra-fine fibers and collecting them on the condensed screen or roller, while bonding themselves to become Meltblown nonwoven fabric.
The completion of the above production process specifically requires feeding equipment, screw extruder, metering pump, melt-blown touch head assembly, air compressor, air heater, receiving device, winding device and other mechanical equipment. So the air heater is the critical important part for the complete process.
The air heater is one of the main equipment in the melt-blown production process, because a large amount of high-temperature clean air is required in the melt-blown process. The air heater heats the air sent by the Roots fan or air compressor to the specified temperature and then delivers into the meltblown die head.
The Air heater made by Jaye industry provides very flexible heating capabilities to compensate for changes in gas flow rates, or change in gas composition, when interconnected to our purpose engineered control panel. Multiple units may be connected in series for higher kW needs.