Kapton Flexible Heaters
Product Details
Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of kapton flexible heaters in China, also supports custom service. Welcome to wholesale high quality kapton flexible heaters at competitive price from our factory.
Jaye's Kapton Flexible Heaters are thin films of a certain thickness consisting of a resistive element produced by etched metal foil and a polyimide insulating layer, and have good flexibility. Compared with the traditional electric heater polyimide flexible film type heater has shown strong advantages.
Product features:
Precise heating
Kapton flexible heaters can be heated almost anywhere needed by attaching the heater to the surface of the part to be heated. Kapton flexible heaters with high heat flow density can be customized where heat loss is high.
Fast preheating and long service life
The flat foil element of the kapton flexible heaters has a larger effective heat conduction area than the wire-wound heater, so there is a smaller temperature gradient between the resistive element and the heat sink of the film type heater, and the heater maintains a lower temperature. Therefore, it allows to produce higher heat flow density and fast heating, and therefore can extend the life of insulation materials.Kapton flexible heaters can work at twice the heat flow density of comparable wire-wound heaters. Insulation life can be extended by a factor of 10. For applications requiring high reliability, such as aerospace, flexible film type heaters are an obvious choice.
Space saving and weight reduction
Kapton flexible heaters typically weigh only 0.023 to 0.037 g/cm2 and are only 0.12 to 0.5 mm thick for applications where space is at a premium, such as satellites and space vehicles, aircraft, portable instruments, and high-precision electronics. Kapton flexible heaters can be installed in spaces that are small for conventional heaters.
Precise customization of shape and size
There is no limit to the size and shape of kapton flexible heaters, Jaye can produce kapton flexible heaters as large as 600mm x 3000mm and as small as 100 mm2. You can specify complex geometries to match the bumps and curves of the hardware to be heated.
| Technical Parameters |
| Heating material: metal alloy film (using high-temperature heat-setting process, reliable quality, long life) |
| Insulation material: polyimide film (thermosetting high-temperature PI film, high and low temperature resistance, stable performance) |
| Electric heating film thickness: 0.06mm ~ 0.3mm |
| Maximum operating temperature: 250°C |
| Minimum temperature resistance: -195°C |
| Maximum power density: 7.8W/cm2 (to be determined according to the specific working conditions) |
| Power density selection: according to the actual use |
Applications:
1. Scientific analysis instruments, such as: to provide constant temperature source for thermal conductivity (or warmth coefficient) measuring instrument, medical instruments, etc., to stabilize the working temperature of optoelectronic components.
2. In the deep cold environment, to make the instruments and equipment reach the safe working temperature. For example - artificial satellites, space vehicles and aircraft and other instruments Facilities and instruments used in high latitudes, instruments, instruments to prevent low temperature, such as card readers, liquid crystal display LCD and other instruments.
3. Vacuum heating and baking field.
4. Automotive oil pan heating, rearview mirror defrosting sheet, antenna or radar snow removal, defrosting heating elements.
5. Healthcare and beauty apparatus industry
Hot Tags: kapton flexible heaters, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, Kapton Polyimide Heaters, Polyimide Insulated Flexible Heaters
