Flat Oil Diffusion Pump Heater
Flat oil diffusion Pump Heaters are designed to be used on the Vacuum Diffusion equipment and oil vacuum pump for heating. The Diffusion Pump heater are made swaged and pressed by under 50 tons to be Flat and smooth in order to increase the dielectric density and smooth platen surface to increase the heating transfer efficiency and long life time.The flat Diffusion Pump Heaters can be designed to be different shape size made based on customer’s specific requirements as diffusion pump heater replacements for heaters 2″to 48, the flat oil diffusion pump heater made by Jaye industry also can be made as the replacement for some famous brand of vacuum diffusion pump.
The advantage and feature of the Diffusion Pump heaters are as below:
1-About 20% power higher than the normal diffusion pump heaters
2-Flat, smooth platen surface assures uniform, efficient heat transfer.
3-Increases pump throughout and increase vacuum diffuse system processing rates.
4-The Diffusion Pump heater made by Jaye industry is easier and faster to install than conventional tubular or plate heaters.
Diffusion pump is currently one of the most extensive and main tools for obtaining high vacuum, usually referred to as oil diffusion pump. A diffusion pump is a secondary pump that requires a mechanical pump as a foreline pump. And the Flat oil diffusion pump Heaters are designed as the heating element for the equipment. When the oil diffusion pump is pre-evacuated to a vacuum of less than 1 Pa with the foreline pump, the oil pan can begin to heat up. Then the diffusion Heater are working to supply the power.
· Vacuum Oil diffusion Equipment
· Oil Tank and platen heating
· Chemical Equipment