4500 Watt Water Heater Element

Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of 4500 watt water heater element in China, also supports custom service. Welcome to wholesale high quality 4500 watt water heater element at competitive price from our factory.

4500 Watt Water Heater Element made by Jaye is one popular type of water heater elements. We custom make the water heating elements based on your specific requirements.

Specifications:

● electric heating power: 2kW, 3KW, 6kW, 7.5kW, 9kw, 12KW

● insulation value of electric heating tube: > 1000m Ω

● withstand voltage value of electric heating tube: 1800V / 0.5ma/min

Main features of electric heating pipe of water heater:

● reasonable material selection to achieve the anti-corrosion and anti scaling performance of the pipe surface

● strict product quality management system standards for production and manufacturing, and more stable quality

● good electrical performance to meet the safety performance of sauna and water heater

● the leading production process in the electric heating industry ensures the long service life of electric heating accessories

● Working Principle:

The water heater needs a heating element to heat the water in the water heater, and this heating element is usually served by an electric heating pipe. When the water temperature in the water heater drops below the predetermined thermostat setting, the heating element will be connected with the current and then heat the surrounding water

● Usage Scenarios：

In addition to the water heater, this product can also be used for air heating, oven heating, oven heating and drying moisture, camper, etc.

● Advantages of 4500 Watt Water Heater Element:

Reliable quality,

Reasonable price,

Stable performance,

Source manufacturer,

Mature process,

Considerate service,

Easy to use,

The temperature rises rapidly,

Low power consumption,

Long service life,

Unlimited by the model and specification.

● Dos and Don'ts:

1. The heating part of the electric heating tube shall be put into the heating medium to avoid the damage of the electric heating tube due to the slow heat dissipation exceeding the allowable heating temperature. In addition, the outgoing part of the wiring shall be exposed outside the insulation layer or heater of the heater so that this part will not be damaged by overheating

2. For the incoming power supply, the voltage should not exceed 10% of the rated voltage indicated on various heat pipes. If it is applicable to lower than the rated voltage, the heat generated by the electric heating pipe will also decrease

3. The terminal shall be fixed with two nuts during wiring, and do not use too much force to avoid damage to the electric heating pipe due to loose screws

4. The terminal shall be kept clean and dry, otherwise it will reduce the insulation performance and short circuit. When used in the environment with chemical corrosion, flammable and explosive liquids and gases, the terminal shall be protected with insulating sealing device

5. When heating viscose and other substances, reduce the power supply voltage at the beginning to reduce the heating capacity of the heating pipe. When all viscose melts into liquid, rise to the rated voltage for heating

6. Special attention shall be paid to the heating medium when selecting the electric heating tube. They shall not corrode the shell

7. After the electric heating pipe has been used for a long time, if there is thick pipe scale and oil scale on the surface, it should be cleaned regularly, otherwise the heat transfer performance of the electric heating pipe will be reduced

8. This product is manufactured by machine, so there is a certain power error

Hot Tags: 4500 watt water heater element, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, Hot Water Heater Element, Immersion Heater With Temperature Control, Heating Element For Water Heater, Water Heater Element