Coil heating element is appearing as a spiral of flattened metal. The Electrical wire embedded in the metal conducts electricity to heat the metal tube. It is easy for electric stove installation. Simple procedure with a few minutes’time. Do not alarmed if a new element smokes a little when you first use it. As the coil heating tubes powered, it will heat up and transfer the heating source to the burner.
Coil Heating Element Details:
Material: Stainless Steel
Brand: Jaye
Voltage: 240V
Frequency: 50Hz
Warranty: 1 year in normal use
Current: 8-9Amp
Power: 1100-1500W
Coil Turns: customized according to your requirement
Temperature: 280 Degree C
The heating pipe owns the advantage of anti rusting and durability.
How to Test a Coil Heating Element?
Step 1- Known what the resistances you are looking for, you can check the elements.
Step 2- Use a multimeter to find resistance. Measure the resistance to the heating element with no any power source and connecting the multimeter leads to the terminals of the heating element.
If the reading on the multimeter is the same or very close to that of the value you calculated, then the element is OK. However, if the reading is a lot higher or lower than the calculated value, the element is failing and won’t be heating fully or heating too much.