Metal braid lead cartridge heater made by Jaye industry has the advantage of high temperature resistance and high density. Electric cartridge heater is made of MgO powder or MgO tube, ceramic cap, resistance wire (NiCr2080). High temperature leads, seamless stainless steel sheath (304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes.
Resistance heating wire | Ni-Cr 80/20 wire |
Sheath | stainless steel 304,321,316, Incoloy 800, Incoloy 840 |
Tube diameter | Min is 3mm, max is 30mm |
Tube length | min is 15mm max is 3meter. |
Maximum temperature | 870 degree Celsius |
Wattage Tolerance | +5%, -10% |
Resistance tolerance | +10%, -5% |
Voltages available | 380V,240V, 220V,110V,36V,24V or 12V |
Length tolerance | ±1 mm |
Diameter tolerance | -0.02mm |
Standard Cold Zone | 5-10mm |
Insulation resistance (cold) | ≥ 500 MΩ |
Maximum leakage current (cold) | ≤ 0.5 mA |
Thermocouple Location | type J |
type K |
Advantages of Metal braid cartridge heater:
1:High-Density Swaged in Cartridge Heater
2:Low density cartridge heater are available
3:Various diameter from 3MM-30MM
4:Good Alloy tube sheath for high corrosion resistance
5:Imported resistance wire, ensure high density large wattage
6: Fasteners and flanges to meet a variety of installation requirements.
7:High temperature, wear-resistant, waterproof
Applications of Metal braid lead cartridge heater.
Torpedo heaters for injection molding | Injection molding manifolds |
Mass spectrometry | Rubber molding/Food production/Immersion tank heating |
HVAC compressors | Fuel cells/Semiconductors/Medical devices |
Sensor measurement devices | Extrusion/Die casting/Hot melt adhesives |
Heat staking / hole punch | Plastic welding/Fluid heating/3D Printers |