In order to better protect the lead wire of the cartridge heaters, Jaye industry make the cartridge heaters with stainless steel hose based on customer’s requirements. The metal hose leads can prevent breakage and cracks caused by lead friction. Especially can provides the best protection against abrasion from sharp edges and also can have a better moisture resistant sealing. For the stainless steel hose leads type cartridge heater, we can make both swaged-in lead type and Crimped-on lead wire type based on the specific application conditions.
If without any specific requirements, we usually have the lead wire 50mm longer than the stainless steel hose.
The cartridge heater made by Jaye have a very obvious advantage of uniform heating and high heating transfer efficiency.
For order, please notify the type of cartridge heater, straight or right angle type. And also let us know the diameter, length, voltage, watt, and the leads requirements.
The following factors need to be considered before purchasing cartridge heaters:
1. Working environment: embedded dry burning or exposed air dry burning, or liquid heating;
2. Temperature, including ambient temperature and required temperature of the heated body;
3. Whether the selection of surface load matches the sheath material and internal insulation material;
4. If the liquid is heated, the corrosion resistance of the sheath material shall be considered.