The brass band heater for heating the injection molding machine barrel is composed of silver welded copper caps, exquisite hexagonal bolts, locks, spring protective sleeves and stainless steel braided high-temperature wire. It has the characteristics of uniform heating, fast heat dissipation, long service life, and reasonable component design. It is a fully enclosed structure and does not leak glue, which effectively improves production efficiency.
1. Stable work, easy to use, fast heating, high thermal efficiency, low power consumption
2. The use time is long, and the production can be made any model and size.
3. Good heat preservation performance, good mechanical performance, corrosion resistance, magnetic field resistance, etc.
The product should be used under the specified voltage. There are voltage changes at night in some region, Jaye recommends to use a voltage stabilizer to avoid affecting the efficiency and life of the product.
If you need to customize, please provide the following information:
1. Diameter (inner diameter MM or outer diameter MM for internal applications)
2. Width (MM)
3. Lead form, length and position
4. The position and size of the thermocouple hole or cutout
5. Voltage and power
6. Single chip or double chip
7. Special gap width
8. If you need to mark on the shell, indicate the content of laser marking
9. Order quantity
10. It is best to provide technical mechanical drawings or sketches when ordering