The structure of the product is that the ceramic heater is made of stainless steel plate. Put the high-insulation and fire-resistant ceramic on the resistance wire, then twist it into a machine and connect it to the power supply. It has the advantages of flexible equipment, low temperature resistance, fast heat transfer, good insulation, and manufacturing is not limited by type and standard size.
Basic Dimensions:
Product Name: Ceramic Band Heater
Main Material: Ceramic
Model: 100x55mm
Inside Diameter: 100mm
Height: 55mm
Voltage: 110V/220V/380V
Power: 860W or custom
Ordering Guide:
The inner diameter of the stainless steel ceramic band heater is very important. Even a small error in the diameter will cause trouble during installation, so the following parameters are required when ordering:
1. Diameter (mica ring: inner diameter mm or outer diameter mm when required for internal application; square: length mm)
2. Width (mm)
3. Lead form, length and position
4. Voltage and power
5. Single sheet or double sheet
6. The position and size of the thermocouple hole or cutout
7. Special gap width
8. If you need to mark on the shell, please indicate the content of laser marking
9. Order quantity
10. Delivery deadline
11.* Please provide mechanical drawings or sketches when ordering.
